IRCommand2 - Tutorials
Tutorial 1 -- Performing Dongle Setup in IRCommand2
After the dongle is installed we can set up IRCommand2 to use it. The following short video explains the dongle setup process using the USB-UIRT dongle as an example. Other dongle types may have different setup details. Press F1 while in Dongle Setup for more guidance on setup requirements.
Or download the dongle setup tutorial (WMV)
Or download the dongle setup tutorial (MOV)
(Note: Right-click and select "Save Link As" to download.)
Tutorial 2 -- Set Up and Train Buttons to Send Commands
A button is normally set up with a signal by training it using a handheld remote for the device to be controlled. The setup process records the signal from the remote and stores it as the Button Action property of the button in IRCommand2. Buttons have many properties, but only the top two properties in the Button Properties list are necessary: (1) Appearance -- to set the label, color, etc. and (2) Button Action -- to set the command signal. Watch this short tutorial video to see the process.
Or download the setup tutorial (WMV)
Or download the setup tutorial (MOV)
(Note: Right-click and select "Save Link As" to download.)